A   A   A   A    | Admin login | | General Data Protection Regulation | | Disclaimer | | Imprint | | Contact |
You are on: Ul-Engine > ROTAX boxer engine

ROTAX boxer engine

Picture: First assembly steps ROTAX 912 UL, engine mount mounted on the fire shot is used for engine suspension.
Picture: First assembly steps ROTAX 912 UL, engine mount mounted on the fire shot is used for engine suspension.
There are a number of engines that are specially manufactured for microlight aircraft or are converted into aircraft engines. Self-built engines are reserved for specialists, as the requirements for an aircraft engine in terms of stability in continuous operation, reliability and low weight are not easy to achieve.

In addition, the engine type is tied to the certification of the microlight aircraft. The installation of another engine type which is not listed in the data sheet is theoretically possible but practically only possible with high technical, bureaucratic and financial effort.

A ROTAX 912 is presented below; it has established itself in the microlight sector. has prevailed. It is a 4-cylinder, four-stroke boxer engine. The engine is both liquid-cooled as well as air-cooled in parts. Water (coolant mixture) for cooling the cylinder heads, oil cooling for the engine block. The cylinders are ribbed so that they are slightly air-cooled.

A reduction gear is permanently installed to which a propeller is flange-mounted. The reduction ratio is 1:2.27 for the 80 hp engine and 1:2.43 for the 100 hp engine and above.

From the motorcycle sector (e.g. former BMW), carburetors from BING 64/32 are used. More recent versions of the ROTAX 912 are offered with fuel injection, the aforementioned BING carburetor is not used here.

Engines without ignition map are designed as stationary engines, i.e. ignition timing setting is designed for full load or almost full load (75%). Under partial load / idling, the fixed ignition timing is not optimal.

As mentioned above, newer developments in the 912 series are equipped with fuel injection and turbochargers. This optimizes the engine system. This has an effect on the performance of the engines. However, this requires a considerable increase in electronics and costs.

However, this fell far short of the goal of offering a lightweight, high-performance engine at an affordable price (the original intention of ultralight aviation).


Graphic: Top view of ROTAX 912 engine, propeller hub left, cylinder numbering.
Graphic: Top view of ROTAX 912 engine, propeller hub left, cylinder numbering.
Maintenance and care is the key to technically trouble-free operation, especially in aviation. The aircraft manufacturer, the engine manufacturer and the manufacturers of the other components publish comprehensive documentation, instructions and, where applicable, warnings. These can usually be found on the manufacturers' service pages. Some associations also have an information system to provide information and further instructions such as urgent repairs, replacements or, if necessary, operating time restrictions or even operating bans on components or the entire aircraft. For the ROTAX 912 in particular, there are a number of technical bulletins relating to the inspection and replacement of parts.

Warranty

Companies are liable for their products under the terms of the warranty. Product liability applies. Some companies also offer free guarantees, and in some cases, paid warranty extensions. However, in practice, the way companies handle warranties – and indeed guarantees – is sometimes unsatisfactory from the buyer’s point of view.

Even though the technical support (e.g. over the phone) may be very good, the claims-handling process can be very reluctant when it comes to damage claims. Even minor amounts (relative, for example, to the purchase price of an engine) are settled only reluctantly, even in cases where the technical situation is clear to the customer.

With technical products, intended use is crucial. Similarly, the installation situation is often unique to each case. An engine cannot simply be put into operation ‘straight out of the box’. It must be integrated into the aircraft system. The installation is often a case-by-case process and may – or may not – have been carried out to the highest standard. In such instances, the engine manufacturer or supplier investigates very carefully whether there has been misuse, installation errors or even design faults relating to the engine’s integration. Furthermore, damage does not always provide a clear indication of the cause, meaning it is not easy for consumers to obtain justice. Where the cause is unclear, it is advisable to commission an expert to oversee the inspection of the engine at the manufacturer’s or distributor’s premises.

The official manufacturer of the engine is Rotax in Gunskirchen / Upper Austria, which can be reached via its website.

https://www.rotax.com in general and for aircraft engines https://www.flyrotax.com

The distributor for Germany, Austria and other European countries is Franz in Schechen / Upper Bavaria.

https://www.flyrotax.com/de/franz

The Bing carburettor is manufactured by BING in Nuremberg / Middle Franconia.

https://www.bingpower.de


       ⇐   |   ⇒  Ignition

Cookies
No tracking cookies are used. Therefore, there is nothing to decline, accept, or select. Please note the General Data Protection Regulation Site.
Wisdoms
“Dummheit ist unbewusste Unwissenheit.“
Josh Billings
Misconseptions
"Der Mensch ist von Natur aus gut, es ist die Gesellschaft, die ihn verdirbt."Jean-Jacques Rousseau
Schedules
Dt. Meisterschaft UL 20.-23. Aug. 26
https://www.deutsche-meisterschaft-ul.de

ROTAX Fly-In Wels 21.-23. Aug. 26
https://www.flyrotax.com/e/rotax-fly-in-austria-2026

Boller Fly-In 29. -30. Aug. 25
http://www.ulboll.de
Webhosting
Counter
001550297
Requests since release 2025